Connection fail [1]

I used the xmanager's Xbrowser to connect to hp-ux B.11.31 U ia64, the replay message is Connection fail.

As your site said, modify the configure using /usr/bt/bin/btconfig -e.
But I can not find out the command.

The command you used was incorrect. Please use '/usr/dt/bin/dtconfig -e' instead.

For your information, you may find our step-by-step guide useful to configure all nessary settings in your system/network environment. It is available at our download site (Step.3) below.

/download/down_xme2.html

Thank you for using Xmanager.


---
Technical Support