Xmanager and frame buffer

PROBLEM DESCRIPTION

Applications that require or use frame buffer are not accessible in Xmanager.

REASON

RESOLUTION

Programs that utilize frame buffer, cannot be outputed with Xmanager, so a different utility should be used in conjunction with Xmanager to send output.

For example, using xwd and xwud:

With the xwd utility, dump the console screen then with the xwud utility, you can see the output in Xmanager. Use the following commands:

# xwd -diaply :0 > dump.out
# xwud -in dump.out -display PC_IP_ADDRESS:0

In PC_IP_ADDRESS:0 shown above, the '0' represents the Xmanager display number. The display number may change depending on its configuration, therefore you must assign the currently running Xmanager's display number.