Redflag 4 XDMCP Configuration

Owned by Support
May 23, 2018

1. XDM Configuration

  • Change runlevel to 5
    Open/etc/inittab and set the initial runlevel to 5 as following:

    id:5:initdefault:

  • Configure KDM
    Open /etc/X11/xdm/xdm-config comment out the "requestPort" option as following:

    DisplayManager.requestPort: 0 ==>
!DisplayManager.requestPort: 0


    Open /etc/X11/xdm/Xaccess and remove the initial "#" character for the following line:

    #* #any host can get a login window ==>
* #any host can get a login window


    Open /etc/kde/kdm/kdmrc and set the Enable entry to true in the [xdmcp] section as following.

    [xdmcp]
Enable=true

2. Firewall (TCP/UDP Ports) Configuration

  • Open UDP port 177 from the PC to the remote host direction.
  • Open incoming TCP ports 6000~6010 from the remote host to your PC.


3. Reboot the remote host and start Xmanager

# init 3; init 5