/
Caldera 3.11 XDMCP Configuration

Caldera 3.11 XDMCP Configuration

1. Dislay manager configuration

  • Change runlevel to 5
    Open/etc/inittab and set the initial runlevel to 5 as following:

    id:5:initdefault:
  • Configure KDM
    Open /etc/X11/xdm/xdm-config comment out the "requestPort" option as following:

    DisplayManager.requestPort: 0 ==>
    !DisplayManager.requestPort: 0


    Open /etc/X11/xdm/Xaccess and remove the initial "#" character for the following line:

    #* #any host can get a login window ==>
    * #any host can get a login window


    Open /opt/kde2/share/config/kdm/kdmrc and set the Enable entry to true in the [xdmcp] section as following.

    [xdmcp]
    Enable=true

2. Firewall (TCP/UDP Ports) Configuration

  • Open UDP port 177 from the PC to the remote host direction.
  • Open incoming TCP ports 6000~6010 from the remote host to your PC.


3. Reboot the remote host and start Xmanager

# init 3; init 5

Related content

Redflag 4 XDMCP Configuration
Redflag 4 XDMCP Configuration
More like this
Gentoo XDMCP Configuration
Gentoo XDMCP Configuration
More like this
Oracle Linux XDMCP Configuration
Oracle Linux XDMCP Configuration
More like this
RHEL 3, 4, 5, 6 XDMCP Configuration
RHEL 3, 4, 5, 6 XDMCP Configuration
More like this
Slackware 9.1 XDMCP Configuration
Slackware 9.1 XDMCP Configuration
More like this
Fedora Core 1~6 XDMCP Configuration
Fedora Core 1~6 XDMCP Configuration
More like this