Advanced Terminal Options Setting

To Change Scroll Buffer Size:

1. Open the Session Properties dialog box.
2. Select [Terminal] from [Category].
3. Enter number of rows to use in [Scroll Buffer].
4. Click [OK].

• Note 
  Scroll buffer size is a value between 0 and 2,147,483,647. 0 means that scroll buffer is not used.

To Change Terminal Type:

1. Open the Session Properties dialog box.
2. Select [Terminal] from [Category].
3. Select a terminal type from [Terminal Type].
4. Click [OK].

To Change Size at Terminal Startup:

1. Open the Session Properties dialog box.
2. Select [Terminal] from [Category].
3. Check [Use the following terminal size when connected] from the [Emulation] area.
4. Enter column size in [Columns].
5. Enter row size in [Rows].
6. Click [OK].

To Change Keypad Mode:

1. Open the Session Properties dialog box.
2. Select [Terminal > VT Modes] from [Category].
3. Select [Normal] or [Application] from [Initial Numeric Keypad Mode].
4. Click [OK].